Innovations
Hankuk Carbon is developing diverse products
Mechanical Testing Equipment
-
Drop Tower (Impact Testing machine)Drop Tower is used to determine the energy required to break or damage a material in which a defined weight falls onto a specimen.
-
Universal Testing Machine (UTM)UTM is used to test the tensile strength and compressive strength, flexural strength, bending, shear, hardness, and torsion testing, providing data for the quality of materials.
-
Fatigue Testing MachineFatigue Testing Machine is used to determine the durability of a material, and are suitable for tensile, compression, and alternating load tests.
-
Universal Testing Machine (UTM) - Low Temperature TesterUTM is used to test the tensile strength and compressive strength, flexural strength, bending, shear, hardness, and torsion testing, providing data for the quality of materials.
Mechanical Testing Equipment
Drop Tower (Impact Testing machine)
Drop Tower is used to determine the energy required to break or damage a material in which a defined weight falls onto a specimen.
Universal Testing Machine (UTM)
UTM is used to test the tensile strength and compressive strength, flexural strength, bending, shear, hardness, and torsion testing, providing data for the quality of materials.
Fatigue Testing Machine
Fatigue Testing Machine is used to determine the durability of a material, and are suitable for tensile, compression, and alternating load tests.
Universal Testing Machine (UTM) - Low Temperature Tester
UTM is used to test the tensile strength and compressive strength, flexural strength, bending, shear, hardness, and torsion testing, providing data for the quality of materials.
Physical and Chemical Testing and Analysis Equipment
-
GPC InstrumentGPC Instrument is used to quantify relative molecular weight and MWD, separating high molecular weight on the basis of size or diameter.
-
HPLC InstrumentHPLC Instrument is used to identify, quantify and purify the individual components of the mixture.
-
FTIR SpectrometerFTIR Spectrometer is used to measure how much light a sample absorbs at each wavelength.
-
RheometerRheometer is used to measure the way in which a viscous fluid flows in response to applied forces.
-
Scanning Electron Microscope (SEM)SEM is an instrument that produces images of a sample by scanning the surface with a focused beam of electrons.
-
Dynamic Mechanical Analyzer (DMA)DMA determines a material’s modulus of elasticity by applying an oscillating force to the sample.
-
Differential Scanning Calorimeter (DSC)DSC is used to determine how a material’s heat capacity is changed by temperature.
-
Thermogravimetric Analyzer (TGA)TGA measures the mass of a sample over time as the temperature changes.
-
Thermomechanical Analyzer (TMA)TMA measures changes in the dimensions of a sample as a function of time, temperature, and force.
-
Heat Release Rate TesterHRR Tester is used to determine the heat release rate of a material when exposed to radiant heat.
-
Microscale Combustion Calorimeter (MCC)MCC is used to measure the flammability properties of materials.
-
Smoke Density ChamberSmoke density chamber measures the specific optical density of smoke generated by the materials
-
45 Degree Flammability Tester45 degree flammability tester evaluates resistance to flame penetration and glow propagation by burning a material at 45 degrees for 30 seconds
-
Vertical Flammability TesterVertical flammability tester is used to evaluate flame resistance by burning materials vertically for 60 and 12 seconds.
Physical and chemical testing and analysis equipment
GPC Instrument
GPC Instrument is used to quantify relative molecular weight and MWD, separating high molecular weight on the basis of size or diameter.
HPLC Instrument
HPLC Instrument is used to identify, quantify and purify the individual components of the mixture.
FTIR Spectrometer
FTIR Spectrometer is used to measure how much light a sample absorbs at each wavelength.
Rheometer
Rheometer is used to measure the way in which a viscous fluid flows in response to applied forces.
Scanning Electron Microscope (SEM)
SEM is an instrument that produces images of a sample by scanning the surface with a focused beam of electrons.
Dynamic Mechanical Analyzer (DMA)
DMA determines a material’s modulus of elasticity by applying an oscillating force to the sample.
Differential Scanning Calorimeter (DSC)
DSC is used to determine how a material’s heat capacity is changed by temperature.
Thermogravimetric Analyzer (TGA)
TGA measures the mass of a sample over time as the temperature changes.
Thermomechanical Analyzer (TMA)
TMA measures changes in the dimensions of a sample as a function of time, temperature, and force.
Heat Release Rate Tester
HRR Tester is used to determine the heat release rate of a material when exposed to radiant heat.
Microscale Combustion Calorimeter (MCC)
MCC is used to measure the flammability properties of materials.
Smoke Density Chamber
Smoke density chamber measures the specific optical density of smoke generated by the materials
45 Degree Flammability Tester
45 degree flammability tester evaluates resistance to flame penetration and glow propagation by burning a material at 45 degrees for 30 seconds
Vertical Flammability Tester
Vertical flammability tester is used to evaluate flame resistance by burning materials vertically for 60 and 12 seconds.
Equipment for Specimen
-
AutoclaveAutoclave is used to mold prepregs at high temperatures/pressures.
-
Dry OvenDry oven is an equipment used for OoA(Out-of-Autoclave) molding process research and molding.
-
Sample RouterSample router produces composite samples by processing a molded plate with the dimensions designated for each mechanical test.
-
Prepreg Cutting MachinePrepreg cutting machine automatically cuts prepregs by specific dimensions/shapes.
Equipment for Specimen
Autoclave
Autoclave is used to mold prepregs at high temperatures/pressures.
Dry Oven
Dry oven is an equipment used for OoA(Out-of-Autoclave) molding process research and molding.g
Sample Router
Sample router produces composite samples by processing a molded plate with the dimensions designated for each mechanical test.
Prepreg Cutting Machine
Prepreg cutting machine automatically cuts prepregs by specific dimensions/shapes.